STARTER-KIT
The evaluation kit for NEC Electronics V850ES / 78K0R / 78K0

<About product warranties>

This product is a kit for evaluation. In the case of initial defects, we will replacement the kit for free. Sorry We cannot accept assurances other than initial defects.

You are able to sent mail for the technical request to following address.
We never accept the question by the telephone.

(E-mail: )

If you notice something, please ask to our company.

Outline / Feature

The kit for evaluate V850ES, 78K0R and 78K0 series made by NEC Electronics is
easily and low price. It is used widely such as research, education or
evaluation for commercialization since micro controller built in flash memory.

<V850ES Series Kit> <78K0R Series Kit> <78K0 Series Kit>
<Automotive Network Development Kit>

*As for the detail, please click the head of each products.

V850ES/HG2 evaluation board
TK-850/HG2
- The evaluation board used the NEC Electronics 32bit single chip microcontroller. (u PD70F3707). All of the ROM, RAM and circumference circuit are efficiently built in one chip on a single board.
- High-speed operation is realized via the 20MHz internal clock..
- 32.768KHz sub-clock standard equipment
- The high speed RAM: 12K-byte is built into CPU chip by the flash memory 256 K-byte.
- 84 I/O ports are equipped at the maximum.
- The board itself is quite small and easy to handle; about the size of a business card.
- It is attached to a GUI debugger, a compiler, a simulator, a project manager, and a circuit diagram.
Connection Specification Catalog Tutorial
Manual(Hardware / Software) Update Imformation

V850ES/JG2 evaluation board
TK-850/JG2
- The evaluation board used the NEC Electronics 32bit single chip microcontroller. (u PD70F3718). All of the ROM, RAM and circumference circuit are efficiently built in one chip on a single board.
- High-speed operation is realized via the 20MHz internal clock..
- 32.768KHz sub-clock standard equipment
- The high speed RAM: 40K-byte is built into CPU chip by the flash memory 512 K-byte.
- 84 I/O ports are equipped at the maximum.
- The board itself is quite small and easy to handle; about the size of a business card.
- It is attached to a GUI debugger, a compiler, a simulator, a project manager, and a circuit diagram.
Connection Specification Catalog Tutorial
Manual(Hardware / Software) Update Imformation

V850ES/KJ2 evaluation board
TK-850/KJ2
- The evaluation board used the NEC Electronics 32bit single chip microcontroller. (u PD70F3734). All of the ROM, RAM and circumference circuit are efficiently built in one chip on a single board.
- High-speed operation is realized via the 20MHz internal clock..
- 32.768KHz sub-clock standard equipment
- The high speed RAM: 16K-byte is built into CPU chip by the flash memory 256K-byte.
- 128 I/O ports are equipped at the maximum.
- The board itself is quite small and easy to handle; about the size of a business card.
- It is attached to a GUI debugger, a compiler, a simulator, a project manager, and a circuit diagram.
Connection Specification Catalog Tutorial
Manual(Hardware / Software) Update Imformation



78K0R/KG3 evaluation board
TK-78K0R/KG3
- The evaluation board uses the NEC Electronics 16-bit single chip microcontroller (uPD78F1166GF). All of ROM,RAM and circumference circuit are efficiently built in one chip on a single board.
- High-speed operation has been achieved with 20MHz clock.
- Sub-clock 32.768KHz standard equipment
- 256-Kbyte flash memory is built into CPU chip. A high-speed RAM:12-Kbyte is built into.
- 84 I/O ports are equipped at the maximum.
- Debugging using on-chip debug function can be done.
- The board itself is quite and easy to handle; about the size of business card. (89mmx52mm)
- It is attached to a GUI debugger, a compiler, a simulator, a project manager, and a circuit diagram.
Connection Specification Catalog Tutorial
User's Manual Update Imformation



78K0/KF2 evaluation board
TK-78K0/KF2
- The evaluation board uses the NEC Electronics 8-bit single chip microcontroller (uPD78F0547D). All of ROM,RAM and circumference circuit are efficiently built in one chip on a single board.
- High-speed operation has been achieved with 20MHz clock.
- Sub-clock 32.768KHz standard equipment
- 128-Kbyte flash memory is built into CPU chip. A high-speed RAM:1024 byte and enhancing RAM:6144 byte is built into.
- 71 I/O ports are equipped at the maximum.
- Debugging using on-chip debug function can be done.
- The board itself is quite and easy to handle; about the size of business card. (89mmX52mm)
- It is attached to a GUI debugger, a compiler, a simulator, a project manager, and a circuit diagram.
Connection Specification Catalog Tutorial
Manual(Hardware / Software) Update Imformation



LIN,CAN network development kit
TK-78K0/FF2+CL
- The evaluation board uses the NEC Electronics 8-bit single chip microcontroller (uPD78F0893). All of ROM,RAM and circumference circuit are efficiently built in one chip on a single board.
- TK-78K0/FF2+CL has a CAN Driver and Lin Driver for CAN, LIN evaluation and development.
- High-speed operation has been achieved with 20MHz clock.
- Sub-clock 32.768KHz standard equipment
- 128-Kbyte flash memory is built into CPU chip. A high-speed RAM:1024 byte and enhancing RAM:6144 byte is built into.
- 35 I/O ports are equipped at the maximum.
- Debugging using on-chip debug function can be done.
- The board itself is quite and easy to handle. (W75mmxH80mm)
- It is attached to a GUI debugger, a compiler, a simulator, a project manager, and a circuit diagram.
Connection Specification Catalog Tutorial
Manual(Hardware / Software) Update Imformation


LIN network development kit
Stick LIN-78K0 (SL-78K0)
- The evaluation board uses the NEC Electronics 8-bit single chip microcontroller uPD78F8020D(The part of 8-bit microcontroller is same as 78K0/KE2). All of the ROM, RAM, circumference circuit and LIN transceiver are efficiently built in one chip on a Stick LIN-78K0.
- High-speed operation has been achieved with 20MHz clock.
- 128 Kbytes of Flash EEPROM, available on the chip,
- Stick LIN-78K0 is programmable and debuggable from PC via USB connection without any additional hardware tools.
- FT2232L (FTDI) is available on board for USB interface (USB2.0 compatible).
- The size of the module is, 82mm x 23mm.
Connection Specification Catalog Tutorial
Manual(Hardware / Software) Update Imformation



V850ES/FJ3 Evaluation Kit
CEB-V850ES/FJ3
- Enable to execute the capability evaluation speedy adopting uPD70F3380.
- CAN I/F is 2ch.
- LIN I/F is 2ch.
- Debug I/F is MINICUBE, MINICUBE2(On chip emulator).
- Enhancing terminal that draws out CPU signal terminal outside.
- USB supplies the power supply.
Connection Specification Catalog Tutorial
Users manual Update Imformation


V850ES/SJ3 Evaluation Kit
CEB-V850ES/SJ3
- Enable to execute the capability evaluation speedy adopting uPD70F3368.
- CAN I/F is 2ch.
- LIN I/F is 2ch.
- Debug I/F is MINICUBE, MINICUBE2(On chip emulator).
- Enhancing terminal that draws out CPU signal terminal outside.
- USB supplies the power supply.
Connection Specification Catalog Tutorial
Users manual Update Imformation
<PRODUCT> <HOME>